Fat Cat
Friday, February 29, 2008
Here is the Racor 1000 series filter with some tightly wound PEX tubing surrounding the housing to transfer heat from the engine coolant to the filter. I will continue to wind more tape around it and then finish it off with some heat insulation. Below the filter are two hose-in-hose fittings. The bigger one, on the left, has a shark bite fitting to connect right to the pex. The smaller one, for the rear end of the hose-in-hose by the Veggie tank, has barb fittings for regular heater hose that will connect to the tank heater. I used a 1/2" thread die to cut threads on the barbed tee to attach the fpt swagelok compression fitting.
Labels: Filter Heater, Hose-In-Hose, Racor Filter
0 comments:
Subscribe to:
Post Comments (Atom)